Choosing the MTS (Multichannel Television Stereo)
Sound
Mode Custom ®
Bass
Treble
Dolby | : | On | |
Speaker | : | On | |
MTS |
| Mono ® | |
TTX/MIX |
|
| V.DOLBY |
HOLD | DUAL I/II |
| CANCEL |
SLEEP | SUBPAGE | SIZE | PIP |
|
|
| ON |
P.SIZE | PBP |
| LOCATE |
Depending on the particular program being broadcast, you can listen to Stereo, Mono, or Dual I/II (Dual I/II is usually a
1Press the MENU button.
Result: The main menu is displayed.
2Press the P▼ or P▲ button to select the Sound.
Result: The options available in the Sound group are displayed.
3Press the 
- or 
+ button.
4Press the P▼ or P▲ button to select the MTS.
5Select the required sound mode by pressing the 
- or 
+ button repeatedly. The sound modes are displayed in the following order: Mono - Stereo - Dual I - Dual II..
You can also set these options simply by pressing the DUAL I/II button. The “DUAL I/II” button displays/controls the processing and output of the audio signal.
➣◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono.
◆If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
◆When receiving a mono sound in the AV mode, connect to the “AUDIO (L)” connector on the rear panel.
