ADJUSTING THE HEIGHT BETWEEN THE DOORS
Making small level adjustments between doors.
If the door of the freezer is lower than that of | If the door of freezer is higher than that of the |
the fridge. | fridge. |
Adjustment part | Adjustment part |
Please open the doors and adjust them as follows:
1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁).
When you release the nut (①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly NOTE counterclockwise direction. This will enable you to loosen the nut(①) with your fingers.
➂ WRENCH | ➂ WRENCH |
➁ BOLT | ➁ BOLT |
➀ NUT | ➀ NUT |
|
2)Please adjust the height difference between the doors by turning the bolt (➁) clockwise ( 
) or
counter clockwise ( 
).
When you turn clockwise ( | ), the door goes up. |
NOTE |
|
➂ WRENCH | ➁ BOLT |
➁ BOLT | ➂ WRENCH |
|
➀ NUT | ➀ NUT |
3)After adjusting the doors, turn the nut clockwise ( 
) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
INSTALLATION INSTRUCTIONS
➂WRENCH
➁BOLT
➀NUT
If you do not fix the nut (①)firmly, the bolt (➁) may be released.
NOTE
➂ WRENCH
➁ BOLT
➀NUT
23
