Samsung RS2530B Install the water filter, Installation Of The Water Dispenser Line

INSTALLATION OF THE WATER DISPENSER LINE

NOTE

Install the water filter.

The water filter is located in the extra space behind the Deli Bin.

1) Remove the fixed cap (A) as shown. the fixed cap separates from the Water Filter Compartment by rotating it as shown. Remove the water filter from the box and put a month

indicator stick on the filter as shown.

NOTE	Keep the cap(A) in a safe place for recapping, when you
	(A)
	don’t need to use the filter.

2)If the water filter was installed in March, put on the "SEP" sticker.

3)Remove the Red protective cap from the filter, then position and insert the filter as shown.

4)Slowly turn the water filter as shown below to align the indication mark on the cover, locking the filter in position. Do not overtighten.

COVER FILTER

SEPARATION

OF RED CAP

ALIGN THE INDICATION MARK

WITH LOCK POSITION.

STICKER (MONTH INDICATION)

• Please check that the indication line aligns with the lock position.

NOTE

Remove any residual matter inside the water supply line after installing filter.

1) Turn on the main water supply & shut-off valve of the water

	supply line.
2)	Run water through the dispenser until the water runs clear	ICE
	(6~7 minutes). This will clean the water supply system and
	clear air from the lines.
3) Additional flushing may be required in some households.
4)	Open the refrigerator door and check if water leaks around
	the water filter.

	• A newly-installed water filter cartridge may cause water to briefly
NOTE	spurt from the dispenser.

WATER

26