ADJUST THE HEIGHT BETWEEN THE DOORS
Making small level adjustments between doors
If the freezer door is lower than the | If the freezer door is higher than the |
refrigerator door. | refrigerator door. |
Adjustment location | Adjustment location |
Please open the doors and adjust the doors as follows: | |
1) Release the nut (①) on the lower hinge | until the upper end of the bolt (➁). |
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter- NOTE clockwise. Loosen the nut(①) with your finger.
➂ WRENCH
➁BOLT
➀NUT
2)Please adjust the height difference between the doors turning the bolt (➁) clockwise( 
) or counter clockwise
( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
➁ BOLT | ➂ WRENCH |
|
➀NUT
3)After adjusting the doors, turn the nut (①) clockwise( 
) until the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
➂WRENCH
➁BOLT
➀NUT
If you do not fix the nut (①)firmly, the bolt (➁) may be released.
NOTE
29
INSTALLATION INSTRUCTIONS
