CHECKING THE WATER DISPENSER LINE
1)In order to operate the ice maker properly, water pressure of 20 ~125 psi is required. In this range a 170 cc paper cup can be filled in 10 secs.
2)The water filter removes particles. It does not sterilize or destroy any
3)If the refrigerator is installed in area with low water pressure (below 20psi), you should install a boost- er pump to compensate for the low pressure.
4)Ensure the water storage tank inside the refrigerator is properly filled inifially. push the water dis penser lever until the water runs from the outlet.
A universal water supply kit is available at extra cost from your dealer. The refrigerator manufac- NOTE turer recommends using a water supply kit containing copper tubing.
INSTALLING THE WATER DISPENSER LINE
Connecting to water supply line:
1)Shut off the main water supply and turn the Ice maker to the off position.
2)Locate the nearest cold drinking water line.
3)Follow the instructions in the ice maker installation kit.
1.Cold Water pipe
2.Pipe Clamp. 3.Copper Tubing 4.Compression Nut 5.Compression Sleeve 6.Shut Off Valve 7.Packing Nut.
26
