3.Operating the SAMSUNG side-by-side refrigerator

Using the control panel

10

9

1

4

2

5

3

6

7

8

Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights

( 1 ) Energy Saverup. Turn Energy Saver off, and the icon goes off. The Energy Saver function turns on automatically when power is supplied to the refrigerator. If condensation or water drops appear on the doors, turn the Energy Saver mode off.

(2 ) Freezer (hold 3 sec for Power Freeze)

Touch this button to set the Freezer temperature. You can set the temperature between -14°C and -23°C. Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer.

It can be helpful if you need to freeze easily spoiled items quickly or if the temperature in the Freezer has warmed dramatically (For example, if the door was left open).

( 3 ) Ice Off / hold 3 Sec for

This button serves two purposes:

Filter Reset

1) If you don’t want to make more ice, Touch this button

2) After you replace the water fi lter, Touch and hold this button for 3 seconds to reset the water fi lter life indicator.

(4 ) Lighting/ hold 3 sec for C↔F

Touching the Lighting button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off.

Touch and hold this button for 3 seconds to switch the temperature units between °C and °F

(5 ) Fridge (hold 3 sec for Power Cool)

Touch this button to set the Fridge temperature. You can set the temperature between 1°C and 7°C.

Touch and hold the this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. This can be helpful if you need to cool easily spoiled items quickly or if the temperature in the fridge has warmed dramatically (For example, if the door was left open).

( 6

) CoolSelect Zone

Touch this button to select your desired CoolSelect Zone type. Also, pressing and holding this button for 3 second locks the

display panel and dispenser buttons so the buttons can not used. The Child Lock Icon Lights up to indicate you’ve activated the

 

(Hold 3 sec for child lock)

 

Child Lock function.

 

 

 

 

 

Touch this button to select your desired ice type. Cubed and crushed ice modes alternate each time you press the Ice

( 7

) Ice Type

Type button. Note that when you push the Ice Type button, you turn the Water dispenser off.

 

 

 

 

 

Touch this button to dispense water.

 

 

( 8

) Water

Note that you cannot dispense water and ice simultaneously.

 

 

The Water dispenser turns off when you press the Ice Type button.

 

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿