Samsung RSG257AA user manual Removing the freezer door, Reattaching the freezer doors, by gently

Removing the freezer door

A few things to mention first.

•Make sure that you lift the door straight up so the hinges are not bent or broken.

•Be careful not to pinch the water tubing and wire harness on the door.

•Place doors on a protected surface to prevent scratching or damage.

1.With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then disconnect the wires by gently pulling them apart 2 .

1

2

2.Remove hinge screws 4 and the ground screw 5 by turning counter-clockwise, and take off the upper hinge 6 . Be careful that the door does not fall on you as you are removing it

5

4

01 SETTING UP

6

Be sure to keep track of all parts you are removing.

3. Next, remove the door from the lower hinge 7 by carefully lifting the door straight up 8 .

8

7

Be careful not to pinch the water tubing and wire harness on the door.

4.	Remove the lower hinge 9 from the bracket 10	by gently
	lifting the lower hinge upwards.	9
		10

Reattaching the freezer doors

To reattach the freezer doors, replace parts in reverse order

setting up _11

DA99-01746A (EN)-19.indd 11 14. 1. 18. �� 11:42