Changing the Interior Lights in the Freezer
The freezer light is located in the bottom of the auger motor case.
1.Lift the lamp cover up and pull out with 2 hands in the direction of arrows.
2.Replace the bulb with a new one.
3.Reattach the light cover.
1 | 2 | 3 |
CHanging tHE watEr fiLtEr
The “Filter Indicator” light lets you know when it is time to change your water filter cartridge. To give you some time to get a new filter, the light will come on up just before the capacity of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest water from your fridge.
1.Remove the water filter from the box and put a month indicator sticker on the filter as shown.
2.Place a sticker on the filter that dates six months in the future. For example, if you are replacing the water filter in March, put the “SEP” (September) sticker on the filter to remind you to replace in September. Normally filter life is about every 6 months.
3.Next, remove the fixed cap by turning it counter clockwise.
4.Remove the new filter’s protective cap and remove the old filter.
5.Position and insert the new filter into the filter housing.
Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, locking the filter in position. Make sure that the indicator is lined up with the “lock” position. Do not over tighten.
Cover filter
1
2 | 4 |
|
Sticker |
|
(month indicator) |
|
3 | Align the indication |
| mark with lock |
| position |
| 5 |
38_ operating
