setting up your side-by-side refrigerator
2. Removing the freezer door
A few things to mention first.
•Make sure that you lift the door straight up so the hinges are not bent or broken.
•Be careful not to pinch the water tubing and wire harness on the door.
•Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then disconnect the wires by gently pulling them apart 2 .
1 | 2 |
2. Remove hinge screws 3 and the ground screw 4 by turning
4
3
5
3. Next, remove the door from the lower hinge 6 by carefully lifting the door straight up 7 .
PU ESTTING01
7 |
6 |
Be careful not to pinch the water tubing and wire harness on the door.
4. Remove the lower hinge 8 using a hex wrench.
setting up _11