setting up your side-by-side refrigerator

Remove any residual matter inside the purifier. (Model with the purifier)

PU ESTTING01

-Open the main water tap to check whether water is running through the water tube on the water inlet side of the purifier.

-If water does not come out through the line, check whether the tap is open.

-Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed.

OUTLET SIDE

PURIFIER

OF PURIFIER

WATER

WATER LINE

 

Attach the purifier lock-clip.

 

 

 

 

 

 

- Hold the purifier lock-clip in the appropriate position

 

 

 

(under the sink for example) and fix it tightly into place

Purifier lock-clip

where to screw.

 

 

 

 

 

 

 

WATER TUBE

Secure the purifier in position.

- Fix the purifier in position, as shown in the figure on the right.

Connect the water line to the refrigerator.

-Remove the compressor cover of the refrigerator.

-Connect the water line to the valve, as shown in the figure.

-When connected, check if there is any leakage. If any, repeat the connection.

-Reattach the compressor cover of the refrigerator.

Purifier lock-clip

PURIFIER

WATER LINE

CONNECTION NUT

INSTRUCTIONS

COMPRESSOR COVER OF

REFRIGERATOR

Secure the water line.

-

Using clip ”A”, fix the water line to the wall (the back of refrigerator).

CLIP A

-

When the water line is secure, make sure whether the water line is not

 

 

excessively bent, pinched or squashed.

WATER LINE

 

 

setting up _21

Page 21
Image 21
Samsung RSH3F Attach the purifier lock-clip, Secure the purifier in position, Connect the water line to the refrigerator