4.Attach the purifier lock stations.(Model with the purifier)

1)Hold the purifier lock stations in the appro- priate position (under the sink for example) and fix it tightly into place where to screw.

5.Secure the purifier in position.

(Model with the purifier)

1)Fix the purifier in position, as shown in the figure on the right.

6. Connect the water tube to the fridge.

PURIFIER LOCK STA-

TION

PURIFIER LOCK STA-

TION

WATER TUBE

PURIFIER

TIGHTENING

BAND

PURIFIER LOCK STATIONS

WATER TUBE

1)Remove the back cover of the fridge.

2)Connect the water tube to the valve, as

shown in the figure.

(The connection nut is located on the right side of the maintenance panel on the back of the fridge.)

3)When connected, check whether there is any leakage.

If any, repeat the connection.

4)Assembly the back cover of the fridge.

CONNECTION NUT

BACK COVER OF

FRIDGE/FREEZER

7. Secure the water tube.

1)Using clip ”A”, fix the water tube to the wall.

2)When the water tube is secure, make sure whether the water tube is not excessively bent, pinched or squashed.

CLIP A

WATER TUBE

13