ŝ8Ş
Connecting to a Power Source
Identification of features
ƈSelf-timer lamp
Icon Status Description
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
For the first 8 seconds, the lamp blinks at 1 second
intervals.
For the final 2 seconds, the lamp blinks quickly at 0.25-
second intervals.
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Blinking
Blinking
Blinking
ƈCamera Status Lamp
ƈMode icon Refer to page 14~17 for more information about the camera mode
setting.
MODE AUTO
PROGRAM
MANUAL
NIGHT
PORTRAIT
CHILDREN
MOVIE PLAY
Icon
LANDSCAPE
CLOSE UP
SUNSET
DAWN
BACKLIGHT
FIREWORKS
BEACH & SNOW
Icon
MODE SCENE
Status Description
The lamp turns on and off when the camera is ready to
take a picture
The lamp blinks while saving the image data and turns
off when the camera is ready to take a picture
While voice memo recording
The lamp blinks
While voice recording The lamp blinks
Transmitting Data with a PC
The lamp turns on (LCD monitor turns off)
When the printer is printing
The lamp blinks
The lamp turns on (The camera focus on the subject)
The lamp blinks (The camera doesn't focus on the subject)
After taking a picture
When the AF activates
When the USB cable is
inserted to a printer The lamp is off
Power on ƃWe recommend using batteries for a digital camera (Within a year from the date
of manufacture). The batteries are listed below.
- Non rechargeable batteries : 2 X AA Alkaline (High Capacity)
- Rechargeable batteries (Optional) : SNB-2512 (Ni-MH)
SBP-2524 (Ni-MH)
Using the batteries
Model SBP-2524 SNB-2512
Type Ni-MH Ni-MH
Capacity 2,500mAh 2,500mAh
Voltage 1.2V X 2 1.2V X 2
Approximately 210 ~ 240Minutes
(Use for cradle)
Charging time
Approximately 240 Minutes
(Use for SBC-N1)
ſIncluded battery may vary depending on sales region.