ŝ59Ş
[ Selecting Video out type ]
ƈThe Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
ƈConnecting to an external monitor
ƃConnect the camera to an external monitor with
the AV cable.
Setup menu
SETUP
Sound
USB
AF Lamp
LCD
Video Out
Back:
Set:OK
NTSC
PAL
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
- When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
- When the camera is connected to an external monitor, the menu will be visible
on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
- When selecting the PAL video out type, the TV monitor turns off and the LCD
monitor of the camera turns on when you record a movie. After completing the
recording, the TV monitor turns on and the LCD monitor of the camera turns off.
[ Quick view ]
ƈIf you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
ƃSub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
SETUP
USB
AF Lamp
LCD
Video Out
Quick View
Back:
Set:OK
Off
0.5 sec
1 sec
3 sec
Yellow - Video
White - sound