31

+/ - button
Movie Clip frame stabiliserSpecial Effect : Photo Frame
You can use the +/ - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
This function helps stabilise images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
1. Press the E button in the Movie clip mode.
2. Press the Left/ Right buttons to select the
stabilizer menu tab.
3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
- : Movie clip frame stabiliser function
becomes disabled.
-: Reduces camera shake during movie recording.
The recording frame range will become narrower than when you
select the menu. Pre-view frames may not display smoothly on
the LCD monitor.
Main menu Sub menu
Available camera mode
WHITE
BALANCE
Exposure
compensation
ISO
RGB
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
AUTO, 50, 100, 200, 400, 800, 1600
R (Red), G (Green), B (Blue)
-2.0-0.0 -+ 2.0 (0.5EV steps)
4. The photo frame will appear.
Press the shutter button to capture an image
Stabilizer
If the memory card is not inserted, this function will not operate.