《74》

Software Notes About the softwareSystem Requirements
Please ensure that you read the instruction manual carefully before use.
•The attached software is a camera driver and image editing software tool for
Windows.
•Under no circumstances should all or part of either the software or the user
manual be reproduced.
•Copyrights for software are licensed only for use with a camera.
•In the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
•Using a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
•Before reading this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
※Screen Captures illustrated on this manual is
based on English Edition of Windows.
●Be sure to check the system requirements before installing the driver.
●You should allow 5 ~ 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Installer.exe] in the CD-ROM Drive
root directory.
INFORMATION

For Windows For Macintosh

Windows 98 / 98SE / 2000 / ME / XP Mac OS 10.0 ~ 10.3
Minimum 64MB RAM Minimum 64MB RAM
200MB of available hard disk space
110MB of available hard-disk space
USB port USB port
CD-ROM drive CD-ROM drive
PC with processor better than Pentium II 450MHz
(Pentium 700MHz recommended)
1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)
For playing back a movie clip
Mac OS 10.1 or later
MPlayer
Power Mac G3 or later
■Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the
camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver for
MAC is not included with the Application CD. You can use the camera with Mac
OS 10.0 ~ 10.3.
■Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.