Samsung Sadt-110cm Summary, Precautions Before Installation, spring washers

Summary

The Corner Mounted Adaptor (SADT-110CM) is used for the installation of the Wall Mounted Adaptor (SADT-100WM) on the corner of a building or other structure.

Precautions Before Installation

•Make sure that the installation location can support the combined weights of the Corner Mounted Adaptor, Wall Mounted Adaptor, Outdoor Housing and Smartdome

Camera (about 11 kg).

•This product is designed to use M10 anchor nuts.

•When installing the product on a concrete wall, use M10 anchor nuts together with plain and spring washers.

•Each anchor nut must be capable of withstanding an extraction force of 700 kg.

•When installing the product outdoors, use interlocking devices made of stainless steel.

•This goods should only be installed by a qualified technician using approved materials and wiring practices in accordance with national, state, and local electrical code.

Installation

1	Select a location that will support four times the total
	weight of the product to be installed (about 44 kg).
	Use the Corner Mounted Adaptor to mark the eight
2
	positions for installing the anchor nuts (M10), drill the
	holes and install the anchor nuts. Then install the Corner
	Mounted Adaptor with the appropriate bolts, plain and
	spring washers.
3	Pull the cables out through the Corner Mounted Adaptor
	and the Wall Mounted Adaptor.

1. Assemble the PG-13.5 cable gland on the Back Plate.

2. Pull the cables to the Wall Mounted Adaptor through the cable gland.

3. Assemble the Back Plate with six screws (FH M3 x L8).

CABLE GLAND

BACK PLATE

CORNER MOUNT

WALL MOUNTADAPTOR

ADAPTOR

GB

1 2