Playback
✤The Audio Dubbing function works only in Player Mode.
✤You cannot dub sound on a pre-recorded tape in LPor 16 bit mode.
✤You can add sound to the original sound on a pre-recorded tape
recorded in SPmode with 12bit sound.
✤Use the internal or an external microphone (not supplied) or other audio
equipment.
✤The original sound will not be erased.
1. Set the Powerswitch to PLAYER.
■If you want to use an external
microphone, connect the microphone to
the external MIC input jack on the
Camcorder.
2. Set the Modeswitch to TAPE.
■When you wish to dub using the
External A/V input, connect the Multi-AV
cable to the Multi-AV jack at the front
side of camcorder. (see to page 75)
3. Press the (PLAY/STILL) button and find
the time frame of the scene to be dubbed.
4. Press the (PLAY/STILL) button to
pause the scene.
5. Press the A.DUBbutton on the remote
control.
■Audio dubbing ( ) icon will be
displayed.
■The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
7. Press the (STOP) button to stop the dubbing.
[ Notes ]
■You cannot use the Audio dubbing function while playing a write
protected video tape.
■To utilize an external MIC or sound source, connect a microphone to
the MIC jack or use the Multi-AV cable to connect to external sound
source input.
■To dub an external sound source, set the AV In/Out function to AV In.
(see page 75)
Dubbing Sound
Audio Dubbing (SC-D465(B) only)
ENGLISH
7676
✤Audio Dubbing
✤LP 16bit
✤12
SP
✤
✤
1. PLAYER
■
2. TAPE
■A/V
-AV
75
3. PLAY/STILL /
4. PLAY/STILL /
5. A.DUB
■
■
6. PLAY/STILL /
7. STOP
■
■AV
■AVIn/Out AV /In
75
(SC-D465(B))
√1