IEEE1394 Data Transfer■CPU: faster Intel®Pentium III™450MHz compatible.
■Operating system: Windows®98SE, ME, XP, Mac OS (9.1~10.2)
■Main memory: more than 64 MB RAM
■IEEE1394 add-on card or built in IEEE1394 card
1. Set the Powerswitch to PLAYER.
2. Set the Modeswitch to TAPE.
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder
to the DV jack of the other DV device.
■Make sure that is displayed on
the LCD screen.
4. Press the Start/Stopbutton to begin
REC PAUSEmode.
■PAUSEis displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the Start/Stopbutton to start recording.
If you want to pause recording momentarily, press the Start/Stop
button again.
7. To stop recording, press the (STOP) button.
[ Notes ]
■When using this Camcorder as a recorder, the pictures that appear
on an external monitor may seem distorted, however recorded
pictures will not be affected.
■Operation is not guaranteed for all the recommended computer
environments mentioned above.
Recording with a DV Connection Cable
System Requirements
ENGLISH
7979
IEEE1394■CPU Intel®Pentium III™450MHz
■Windows®98SE ME XP Mac OS 9.1 10.2
■64MB RAM
■IEEE1394 IEEE1394
1. PLAYER
2. TAPE
3. DV
DV DV DV
■
4. Start/Stop /
REC PAUSE
■PAUSE
5. DV
6. Start/Stop /
Start/Stop
7. STOP
■
■
DV
DV
USB
AV/ S