Playback
✤You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Multi-AV cable.
■The yellow jack: Video
■The white jack: Audio(L) - Mono
■The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Powerswitch to PLAYER.
4. Set the Modeswitch to TAPE.
5. Turn on both the TV and VCR.
■Set the input selector on the VCR to
Line.
■Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
✤You can play the recorded tape in Player mode.
1. Connect a power source and set the Powerswitch
to PLAYER.
2. Set the Modeswitch to TAPE.
3. Insert the tape you wish to play back.
4. Using the / (REW/FF) buttons, find the first
position you wish to play back.
5. Press the (PLAY/STILL) button.
■The images you recorded will appear on the TV after a few
seconds.
■If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
■The playback mode (SP/LP) is determined by the mode in which
the tape was recorded.
■If the VCR has an S-Video input terminal, you may use S-Video
Connector for better quality.
■The S-Video Connector transmits video only. Connect Audio cables
for sound.
■If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
Connecting to a TV which has no Audio and Video Input Jacks
Playback
ENGLISH
7171
✤
1.
■Video
■Audio L [ ]-
■Audio R [ ]
2.
3. PLAYER
4. TAPE
5.
■Line
■
6.
✤Player
1. PLAYER
2. TAPE
3.
4. /REW/FF /
5. PLAY/STILL /
■
■
■SP/LP /
■
S-Video S-Video
■S-Video
■
Audio L
DV
USB
AV/ S
Antenna
S-Video input
TV
VCR
Camcorder
Video input-Yellow
Audio input(left)-White
Audio input(right)-Red
Audio/Video/
S-Video