24
❚ MOTION DET
[MOTION DET] menu is used to configure the motion detection related
settings. If you press the SETUP switch when [ON…] is selected in the
[MOTION DET] menu, the corresponding screen appears.
You cannot change the setting for type 2 because it is prefixed with the
full screen. In case of 1 and 3, you can set the motion detection area
on your own.
Those 3 types are like the following:
1. Window Type
The selected area is displayed with a box. The motion can be
detected for the area only. You can manually set the motion
detection area. You can use the Up/Down/Left/Right SETUP
switch to set the size. To move to [POSITION], press the SETUP
switch. After setting the position using the Up/Down/Left/Right
SETUP switch, press the SETUP switch to move to the upper
menu. To set the size and position for [AREA], select any of 0, 1,
2, and 3.
CAMERA.ID.. OFF
IRIS.. ALC...
SHUTTER.. OFF
AGC.. HIGH
WHITE.BAL.. ATW2
FOCUS.MODE.. AF
MOTION.DET.. ON...
DAY/NIGHT.. DAY...
PRIVACY.. OFF
SPECIAL.. ...
PRESET.. ...
EXIT.. QUIT
(MOTION.DET)
TYPE. 1
AREA. 0*....1*....2*....3*
DISPLAY. ON
SENSITIVITY. L.�.�.�.I.�.�.�.H
RET
SCC-C4333_Eng-EURO.indd 24 2007-11-12 오전 10:18:26