How to use OSD Menu
INTELLIGENCE
eINTELLIGENCEf
MOTION |
|
| OFF |
| |
ADVANCED |
|
| OFF |
| |
MASK AREA | 1 2 3 4 |
| |||
DISPLAY |
|
| ON |
| |
SENSITIVITY | [4] |
|
|
|
|
|
|
|
| ||
RESOLUTION | [5] |
|
|
| |
|
|
|
| ||
You can set the motion detection and tracking in the INTELLIGENCE menu.
❖ MOTION | [OFF,TRACKING,DETECTION] |
•TRACKING
Detects and tracks a moving object.
•DETECTION
Detects a moving object.
Note :
–If it is set to DETECTION, you can not set such functions as FIXED/MOVED and FENCE in the ADVANCED menu.
❖ ADVANCED | [OFF, FIXED/MOVED, FENCE] |
Detects a motion of an object and displays an image of any moving object before tracking the moving route.
•FENCE
This is to detect if a moving object passes through the specified LINE or AREA.
In a condition where a moving object is detected in an analysis of the previous and current frames whose movement overlaps a certain area, the system displays “PASS” if the object’s center line passes through the line while it displays “ENTER” or “EXIT” if the center point passes through the area.
| FENCE |
|
|
|
|
LINE |
| OFF |
AREA |
| OFF |
You can set the position and detection direction of the LINE, and the size and position of the AREA.
- How to set the line
| LINE |
|
|
|
|
|
|
| |
PIXEL LEVEL | [4] |
|
| |
|
| |||
<POINT> |
|
|
|
|
DIRECTION |
| §¨ | ||
|
| |||
