How to use OSD Menu
You can select from LOW, MID and HIGH for the brightness of DAYNIGHT, which is a brightness level in switching from the color filter to
The DWELL TIME of DAYNIGHT is a time required to determine the need for switching the filter.
You can select from LOW, MID and HIGH for the brightness of NIGHTDAY, which is a brightness level in switching from the
The DWELL TIME of NIGHTDAY is a time required to determine the need for switching the filter.
The MASK menu is used to prevent a filter switch error or inability of determining the switch in existence of a high spot light source at night. If you press the SETUP switch in item 1 or 2 of the MASK menu, you will see a menu where you can specify an area to mask.
MASK AREA
<SIZE> <LOCATION>
|
|
You can specify Mask 1 and 2 simultaneously. The mask is used only for determining the filter switch and any excessive bright area at night will be masked.
Note :
–If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
| ❖ WHITE BAL | [DAY/NIGHT] |
If you want to adjust the color scheme, use the WHITE BALANCE function.
•DAY
In DAY mode, you can set the color values of
RED and BLUE. The screen will be displayed in colors according to your settings.
WHITE BAL
DAY/NIGHT |
|
|
| DAY | |
MODE |
|
|
| AWC | |
RED | |||||
BLUE | |||||
| [0248] |
|
| ||
|
|
| |||
| [0247] |
|
| ||
|
| ||||
Note :
–You can set the values of•NIGHT
Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance.
If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in DAY/NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings.
| WHITE BAL |
|
|
| |
DAY/NIGHT |
| NIGHT | |||
BRIGHTNESS |
|
| MID | ||
MODE |
|
| AWC | ||
RED | |||||
BLUE | |||||
[0248] |
|
|
| ||
|
|
| |||
[0247] |
|
|
| ||
| |||||
Note :
–You can set the values of