How to use OSD Menu

￿PRIVACY ZONE SET1￿

PIXEL LEVEL

 

 

[4]

 

 

 

 

 

 

 

 

<POINT>￿

 

 

 

 

 

 

<POSITION>￿

 

 

 

 

 

 

 

 

 

 

￿ ￿ ￿ ￿

 

 

￿

- How to set the pointYou can set each position of the 4 points.

①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.

②Use the ￿￿￿￿ switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.

-How to set the position

You can move the position of the overall area.

①By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.

②Use the ￿￿￿￿ switch to move the position and press the SETUP switch to confirm it.

Note :

–If more than one PRIVACY ZONE is specified and the PRIVACY SET is set to ON, the PIP function will be deactivated.

–If the 12th PRIVACY ZONE is specified, the LINE function of FENCE will be deactivated.

OTHER SET

￿OTHER SET￿

 

EXTERNAL TRG

OFF

FACTORY DEFAULTS

￿

OSD COLOR

BW

￿

￿

❖EXTERNAL TRG

Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen.

￿EXTERNAL TRG￿

 

 

 

STILL TIME

 

OFF

DELAY TIME

FIX

￿

￿

You can set the STILL TIME to 0~4 seconds.

If DELAY TIME is set to FIX, the DELAY TIME will be set in sync with the STILL TIME; if set to USER, the DELAY TIME will be set to your setting.

–

❖FACTORY DEFAULTSAll the settings will be restored to the factory default.

However, the settings of PROTOCOL, BAUD RATE, ADDRESS and LANGUAGE will not be restored to the default.

❖ OSD COLOR

[BW, R/G/B]

You can set the OSD(On-screen Display) color to COLOR or B/W.
24 – DIGITAL COLOR CAMERA