(AWB/MANU)(AWB/MANU)
E
|
| press the |
|
| |
|
| [Left/Right] |
|
| |
|
| PRESET | OFF (USER).. | ||
|
| key | |||
PRESET | 3200K | RED | ( 00) - - - - I - - - - | ||
| |||||
RET |
|
| BLUE | ( 00) - - - - I - - - - | |
|
| RET |
|
SPECIAL
You can control the BAUD RATE, REVERSE, POSI/NEGA, DETAIL, and
E
MOTION DET function by yourself in the SPECIAL menu. If your select the SPECIAL menu and press the [ENTER] key, the SPECIAL submenu screen will appear.
SYNC
The INT mode is necessary for using the internal synchronization and the LINE... mode is necessary for the operation of multi cameras because it synchronizes the camera phase by using the external signal(AC Signal). A little phase deviation for some sets may be aligned
CAMERA ID | ON... |
|
| ||
IRIS | DC... |
|
| ||
BLC/WDR | OFF |
|
| ||
COLOR/BW | EXT... |
|
| ||
SHUTTER | OFF |
|
| ||
|
| ||||
AGC | OFF | press the | |||
WHITE BAL | MANU... | ||||
[ENTER] key | |||||
SYNC | INT | ||||
|
| ||||
SPECIAL |
| ... |
|
| |
EXIT |
| QUIT |
|
| |
(SPECIAL) |
| |
|
| 38400 |
BAUD RATE | ||
REVERSE |
| OFF |
POSI/NEGA | + | |
DETAIL | ||
MOTION DET | OFF | |
PRIVACY | ... | |
RET |
| |
by adjusting the PHASE. The SYNC function is available only with AC power source. Put the cursor on the SYNC, press the LEFT/RIGHT key to select the LINE... item, and press the [ENTER] key. Now, you will see the submenu to adjust the PHASE. The PHASE ranges from
| CAMERA ID | ON... |
|
|
|
| (LINE LOCK) |
| ||
| IRIS | DC... |
|
|
|
|
|
|
| |
| BLC/WDR | OFF |
|
|
|
|
|
|
| |
| COLOR/BW | EXT... |
|
|
|
|
|
|
| |
| SHUTTER | OFF |
|
|
|
|
|
|
| |
| AGC | OFF |
| press the |
|
|
|
| ||
| WHITE BAL | MANU... |
|
|
|
|
| |||
|
| [ENTER] key |
|
|
|
| ||||
| SYNC |
| LINE... |
|
|
|
|
| ||
| SPECIAL |
| ... |
|
|
|
|
|
|
|
| EXIT | QUIT |
|
|
|
| PHASE |
| ||
|
|
|
|
|
|
|
| RET |
|
|
|
|
|
|
|
|
|
|
|
|
|
❖When you use DC power source, the SYNC Menu is full
34
❿BAUD RATE : Sets the communication speed to 4800, 9600, 19200, or 38400bps for
❿REVERSE : REVERSES THE SCREEN IN 3 MODES, LEFT/RIGHT, UP/DOWN, OR LEFT/RIGHT/UP/DOWN.
❖Note: Please reset the BLC, MOTION, PRIVACY area because they don’t change by all means.
❿POSI/NEGA : Outputs the video brightness signal normally or reversely. The brightness level is high at inverted output.
❿DETAIL : Adjusts the horizontal and vertical sharpness.
❿MOTION DET : MOTION DET detects any movement of objects. if you
activate the MOTION DET function at the time when you expect nobody to move, the function will detect the movement of an intruder Once
detected, the function outputs the ALARM signal. The MOTION DET function detects any movement and selects the movement sensitivity and the area to detect the movement. If you select the ON... mode and press the [ENTER] key, the MOTION DET submenu screen will appear.
35
