How to use OSD Menu
❖ | [INT, LINE] |
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal synchronization.
If selecting LINE, the camera will use the external power source frequency for the synchronization.
You can adjust the
Note :
–Use of DC 12V will fix
❖ AGC COLOR SUP | [LOW , MID, HIGH] |
Adjust the color scheme according to the AGC value.
❖ REVERSE | [OFF, H, V, H/V] |
Mirrors video signals horizontally, vertically, or both.
❖ POSI/NEGA | [+, |
Output as it is or mirror the video brightness signal.
❖ PIP | [OFF, ON] |
Displays a sub image together with the main image on the same screen using the Picture In Picture function.
Note :
–If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated.
–If the INTELLIGENCE function is set to FENCE mode, the PIP menu will be deactivated.
❖ DIS | [OFF, ON] |
Digital Image Stabilization will set the
Note :
–If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation, the DIS function will be deactivated.
INTELLIGENCE
eINTELLIGENCEf
MOTION |
|
| OFF | ||
ADVANCED |
|
| OFF | ||
MASK AREA | 1 2 3 4 |
| |||
DISPLAY |
|
|
| ON | |
SENSITIVITY | [4] |
|
|
|
|
|
|
|
| ||
RESOLUTION | [5] |
|
|
| |
ALARM OUT |
|
|
| ||
|
|
| |||
You can set the motion detection and tracking in the INTELLIGENCE menu.
❖ MOTION | [OFF,TRACKING,DETECTION] |
•TRACKING
Detects and tracks a moving object.
•DETECTION
Detects a moving object.
Note :
–If it is set to DETECTION, you can not set such functions as FIXED/MOVED and FENCE in the ADVANCED menu.
❖ ADVANCED | [OFF, FIXED/MOVED, FENCE] |
Detects a motion of an object and displays an image of any moving object before tracking the moving route.
•FENCE
This is to detect if a moving object passes through the specified LINE or AREA.
In a condition where a moving object is detected in an analysis of the previous and current frames whose movement overlaps a certain area, the system displays “PASS” if the object’s center line passes through the line while it displays “ENTER” or “EXIT” if the center point passes through the area.
22 – DIGITAL COLOR CAMERA
