User Guide

4.Align the arrows on the COVER-CEILING and the BRACKET to assemble the two parts and then rotate the COVER-CEILING approximately 25 degrees to fix them together.

BRACKET

COVER-CEILING

CASE-BOTTOM

Point Align the arrows on each side when assembling the pieces

Caution Make sure to hold and rotate the COVER-CEILING and not the CASE-BOTTOM, otherwise the COVER- CEILING may not turn appropriately and the camera will not be properly assembled.

5.Push the STOPPER-PIN firmly into the COVER-CEILING HOLE STOPPER-PIN

STOPPER-

PIN

COVER-

CEILING

Point Use a straight screwdriver to lift and pull out the

STOPPER-PIN when dismantling.

User Guide

Caution The STOPPER-PIN needs to be properly in place to prevent the camera body from falling off.

6.Adjusting the horizontal alignment of the camera LENS BLOCK.

-Leave the lens block position as provided when installing on a ceiling.

E

ceiling

LENS-

BLOCK

Installing on a ceiling (Default position)

-Completely unscrew the LENS-BLOCK fixing-screw in the anti-clockwise direction and rotate the LENS- BLOCK 180 . The text - “BOTTOM” - must face downwards. Fix the LENS-BLOCK by putting the removed fixing-screw back into the other side.

 

Wall

LENS-

Fixing-Screw

BLOCK

 

Installing onto a wall.

10

11