How to use OSD Menu
Use the switch to select one from PRIVACY 1 through 12.
Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position.
PRIVACY ZONE SET1
①By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.
②Use the switch to move the position and press the SETUP switch to confirm it.
Note :
|
|
|
|
|
| – If more than one PRIVACY ZONE is specified and the |
PIXEL LEVEL | [4] |
|
| PRIVACY SET is set to ON, the PIP function will be | ||
|
| |||||
<POINT> |
|
|
|
| deactivated. | |
<POSITION> |
|
|
|
| ||
|
|
|
| – If the 12th PRIVACY ZONE is specified, the LINE function | ||
|
|
|
|
|
| |
|
|
|
|
|
| of FENCE will be deactivated. |
|
| |||||
ENG
- How to set the point
You can set each position of the 4 points.
①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.
②Use the switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.
-How to set the position
You can move the position of the overall area.
English – 29