How to use OSD Menu
Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position.
PRIVACY ZONE SET1
①By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.
②Use the switch to move the position and press the SETUP switch to confirm it.
Note :
|
|
|
| – If more than one PRIVACY ZONE is specified and the |
PIXEL LEVEL | [4] |
|
| PRIVACY SET is set to ON, the PIP function will be |
|
| |||
<POINT> |
|
|
| deactivated. |
<POSITION> |
|
|
| |
|
|
|
|
|
|
|
|
|
①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.
②Use the switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.
-How to set the positionYou can move the position of the overall area.–If the 12th PRIVACY ZONE is specified, the LINE function of FENCE will be deactivated.
OTHER SET
| OTHER SET |
|
|
| |
| EXTERNAL TRG | OFF |
FACTORY DEFAULTS | ||
OSD COLOR | BW | |
Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen.
ENG
English – 27