installation

CAMERA INSTALLATION•Zoom and Focus Lever

- Loosen the Levers and adjust Zoom/Focus

After controlling, tighten each lever.

1.Zoom Lever

-To widen the viewing angle, turn the “Zoom Lever” to “W”(Wide)

-To obtain a closer view, turn this Lever to “T” (Tele).

2.Focus Lever

-To adjust the Focus between “N” (Near) or “” (Far) until the sharpest focus is achieved.

3.Ring Guide Bolt

•Be carefull not to lose these small bolts (3pcs) which should not be touched in normal use.

4. DC Level Volume Screw Cap

•Remove this screw Cap carefully. Retain it in a safe place,

as it must be replaced to protect from water entering the camera body.

•The DC level volume for the adjustment in the screw hole.

-For a bright screen, turn the DC Level Volume slowly towards “H” (counter-clockwise) with the driver provided.

-For a dark screen, turn it towards “L” (clockwise).

•Then tighten the screw Cap to protect water entering

5. Service Video Port Description

04_ installation