SHUTTER
In the SHUTTER option, you can specify the speeds of the
The higher the field number, the slower the shutter speed. Accordingly, a still picture will be sharper. In the case of video, an image captured of an object will be blurry.
(SET UP)
CAMERA ID | OFF | |
IRIS | ALC... | |
SHUTTER |
| OFF |
AGC | LOW | |
WHITE BAL | ATW | |
SPECIAL | ... | |
AUTO FOCUS | ONEAF | |
MOTION DET | OFF | |
PRESET | ... | |
COLOR/BW | COLOR | |
EXIT | QUIT |
SHUTTER
➞OFF ➞ 1/100(1/120) ➞ 1/250 ➞ 1/500 ➞ 1/1000 ➞ 1/2000 ➞ 1/4000 ➞ 1/10K ➞ OFF ➞ AUTOX2 ➞ AUTOX4 ➞ AUTOX6 ➞ AUTOX8 ➞ AUTOX12 ➞ AUTOX16 ➞ AUTOX24 ➞ AUTOX32
➞AUTOX48 ➞ AUTOX64 ➞ AUTOX96 ➞ AUTOX128 ➞ OFF
➞FIXX2 ➞ FIXX4 ➞ FIXX6 ➞ FIXX8 ➞ FIXX12 ➞ FIXX16 ➞ FIXX24 ➞ FIXX32 ➞ FIXX48 ➞ FIXX64 ➞ FIXX96 ➞ FIXX128
19
AGC (MOTION)
In the AGC (Automatic Gain Control) option, you can specify whether to automatically control the GAIN when the obtained video is below a certain level of brightness because it was recorded under insufficient lighting. To automatically control the GAIN, set the AGC option to LOW or HIGH. Otherwise, set it to OFF. If the you set the AGC option to LOW, the maximum GAIN of the AGC will be set to low, and if set to HIGH, the maximum GAIN will be set to high.
If the SHUTTER option is set to an auto
(SET UP)
CAMERA ID | OFF | |
IRIS | ALC... | |
SHUTTER | AUTOX4 | |
MOTION |
| NORMAL |
WHITE BAL | ATW | |
SPECIAL | ... | |
AUTO FOCUS | ONEAF | |
MOTION DET | OFF | |
PRESET | ... | |
COLOR/BW | COLOR | |
EXIT | QUIT |
☞S.S : Select to maximally enhance the resolution of a still image by increasing the lowest value of AGC GAIN and the scale of low speed shutter to their maximum.
(This is used mainly to monitor almost still objects in dark places.)
☞SLOW : Select to enhance the resolution of a still image as much as possible by increasing a low value of AGC GAIN and the scale of low speed shutter. (This is used mainly to monitor objects that make a small movement in dark places.)
☞NORMAL : Select to display the normal picture with a medium value of AGC GAIN and the scale of normal speed shutter. (This is used mainly to monitor moving objects in dark places.)
☞FAST : Select to focus on the moving objects by decreasing a high value of AGC GAIN and the scale of normal speed shutter. (This is used mainly to monitor objects showing active movements in dark places.)
☞F.F : Select to focus on the moving objects by decreasing the highest value of AGC GAIN and the scale of low speed shutter to their minimum. (This is used mainly to monitor fast moving objects in dark places.)
20