PreparingtheCablesConnectingtheCables

To install and use the camera, first prepare the following

1. Connect one end of the BNC cable to the VIDEO OUT.

cables.

2. Connect the other end of the BNC cable to the VIDEO IN

 

 

The requirements for the power adapter, which connects to

of the monitor.

the camera's POWER IN terminal, are as follows:

 

●

SCC-C4201(P), SCC-C4203(P) : DC12V 600mA

 

●

SCC-C4301(P), SCC-C4303(P) : AC24V 300mA

E

 

DC12V 600mA

 

 

 

Video terminals on the back

 

 

of the monitor

 

 

BNC cable

 

 

REMOTE RS-485 POWER

Video Cable

Use a BNC cable, such as the one shown below, to connect the camera's VIDEO OUT to the monitor.

3.Plug in the power adapter. Use a "minus" screwdriver to connect one part of the power adapter, which consists of two lines, to the POWER terminal of the camera as follows :

POWER SELECTION switch underneath the power adapte

POWER SELECTION

REMOTE RS-485 POWER

switch underneath the

 

power adapte

 

9

10