How to use OSD Menu
③Set up Action, Dwell time and Option. Note that selected item is displayed in reverse. Move cursor Left/Right to select items and move cursor Up/Down to change each value.
EDIT SCAN | 1 |
NO. ACTION NO. DWELL OPT
1NONE
2NONE
3NONE
4NONE
5NONE
SAVE | [◄ ►:MOVE CURSOR] |
CANCEL | [▲▼:CHANGE VAL.] |
•Action NO.
[NONE/PRESET/AUTO PAN/PATTERN]
• DWELL [1 second ~ 4 minutes]
Sets Dwell Time between functions
•OPT
Option. It represents preset speed (2~360) when preset is selected. It should be the number of repetition (1~255) when Pattern or Auto Pan is selected for Action
④Set up items such as Action, NO., Dwell and OPT.
EDIT SCAN | 1 |
NO. ACTION NO. DWELL OPT | |
1 PRESET | 1 00:03 360 |
2NONE
3NONE
4NONE
5NONE
SAVE | [◄ ►:MOVE CURSOR] |
CANCEL | [▲▼:CHANGE VAL.] |
⑤After fi nishing setting up an Action, press NEAR or ENTER key to
EDIT SCAN | 1 |
NO. ACTION NO. DWELL OPT
1 PRESET 1 00:03 360
2NONE
3NONE
4NONE
5NONE
SAVE | [NEAR:EDIT | ACT] |
CANCEL | [FAR :EDIT | END] |
⑥ After fi nishing setting up all Actions, press FAR |
| ||
key to exit. Then cursor should be moved to |
| ||
“SAVE.” Press NEAR or ENTER key to save |
| ||
data. |
| ENG | |
EDIT SCAN | 1 | ||
| |||
NO. ACTION NO. DWELL OPT |
| ||
1 PRESET 1 00:03 360
2NONE
3NONE
4NONE
5NONE
SAVE
CANCEL
