Operation
SCAN
•Function
The Scan function allows running sequence of Presets, Pattern and/or Auto Pans. Max 8 Scan can be stored. Each Scan can have max 20 action entities which can be preset, pattern or Auto Pan. Preset speed can be set up and the repeat number of Pattern & Auto Pan can be set up in Scan setup. Dwell time between actions can be set up also.
Dwell Time
Preset 1 | Pattern 1 | Scan 1 |
| Max 20 Entities |
|
•Set Scan
Use OSD Menu to create a Scan.
•Run Scan
Method1) <Run Scan> [Scan NO] [Enter]
Method2) <Go Preset> [Scan NO.+150] ex) Run Scan 7 : <Go Preset> [157]
•Delete Scan
Use OSD Menu to delete.
SCHEDULE
•Function
The Schedule function allows running an appropriate function like Preset, Auto Pan, Scan, Pattern, Home move at designated day and time. For example, if you setup a rule Tuesday at 9:00AM and Preset 1 (say Main Gate), the camera will move to main gate every Tuesday at 9:00AM. If you choose Weekday, camera will move to Main gate everyday except weekend.
It is noted that due to the real time clock, the time data will be kept regardless of blackout. The initial time and day setup is essential to proper Schedule function.
•Set Schedule
Use OSD Menu to create a Schedule
•Run Schedule
Use OSD Menu of Schedule Master Enable
•Delete Schedule
Use OSD Menu to delete.
OTHER FUNCTIONS
•Preset Lock
This function is made to protect preset data from unauthorized overwriting. If Preset Lock is ON, Preset save command using Hot Key is disabled while Preset save using OSD Menu is acceptable.
•Power Up Action
This function enables to resume the last action executed before power down. Most of actions such as Preset, Pattern, Auto Pan and Scan are available for this function but Jog actions are not available to resume.
if there are no setup for those functions like Preset, Pattern, Auto Pan and Scan, Camera will automatically move to Home position after rebooting. If Power Up Action is set to be ON, camera will continue the function which is executed lastly after rebooting.
•Auto Flip
In case that tilt angle arrives at the top of tilt orbit (90°), zoom module camera keep moving to opposite tilt direction (180°) to keep tracing targets. As soon as zoom module camera passes through the top
of tilt direction(90°), images should be reversed automatically and F appears in screen. If this function is set to OFF, tilt movement range is 0 ~ 90°.
•Parking Action
This function enables to locate the camera to specifi c position automatically if operator doesn’t operate the controller for a while. The Park Time can be defi ned as an interval from 5 seconds to 4 hours.
•Alarm Input
8 Alarm Inputs are used. If an external sensor is activated, camera can be set to move to corresponding preset position. It is noted that the latest alarm input is effective if multiple sensors are activated.
•Alarm Output
There are 4 Ch. of Alarm Outputs and all of them can be assigned to a certain Preset number. For example, if you assign Preset 5 to AO2, calling Preset 5 result in turning On of AO2.
•Privacy Zone Mask
To protect privacy, MAX. 8 Privacy Masks can be created on the arbitrary position to hide objects such as windows, shops or private house. With Spherical Coordinates system, powerful Privacy Zone Mask function is possible.
•GENERAL/SPECIAL Image Setup
WB (White Balance) and AE (Auto Exposure) can
ENG |
