Samsung SCC-C7478P manual Introduction, Features

Introduction

FEATURES

❖Camera Specifications

•CCD Sensor : EX-view HADTM CCD

•Zoom Magnifi cation : × 36 Optical Zoom, × 12 Digital Zoom (Max × 432 Zoom)

•Wide Dynamic Range Function

•Day & Night Function : ICR(IR Cut fi lter Removal)

•Various Focus Mode : Auto Focus / Manual Focus / Semi-Auto Focus.

•Independent or Global camera settings for each Preset locations.

❖Powerful Pan/Tilt Functions

•Max. 360°/sec high speed Pan/Tilt Motion

•Using Vector Drive Technology, Pan/Tilt motions are accomplished in the shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.

•Ultra low speed (0.05°/sec) enables operator to locate camera to desired target view with accuracy and ease.

•Zoom-proportional pan/tilt speed helps operator to move the camera easily.

❖Preset, Pattern, Auto Pan, Scan, Privacy Mask, Schedule and More…

•MAX. 127 Presets are assignable. All of them have independent characteristics such as White Balance, Auto Exposure, Label, Alarm Input/ Output and so on.

•Max. 8 set of Auto Pan can be stored. This enables to move camera repetitively between two preset positions with designated speed.

•Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible.

•Max. 8 set of Scan action can be stored. This enables to move camera repetitively with combination of Preset or Pattern or Auto Pan. A Scan is composed of max. 20 entities of Preset/ Pattern/Auto Pans.

•Max 8 Privacy Masks can be set up to protect privacy of other people.

•7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Scan, Pattern and Auto Pan) can be defi ned for each rule. Also, it is possible to use Weekday and All days to simplify the rule.

❖PTZ(Pan/Tilt/Zoom) Control

•With RS-485 communication, max. 255 of cameras can be controlled at the same time.

•Pelco-D/ Pelco-P/ Samsung protocol can be selected as a control protocol in the current version of fi rmware.

❖OSD(On Screen Display) Menu

•OSD menu is provided to display the status of camera and to confi gure the functions interactively.

•The information such as Camera ID, Pan/Tilt/ Zoom/Direction, Alarm Input & Output, date/time, current temperature and Preset can be displayed on screen.

•Each display item can be turned on or off independently.

❖Alarm I/O Functions

•8 alarm sensor Inputs and 4 relay output are available.

•To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler.

•The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.

•If an external sensor is activated, camera can be set to move to the corresponding Preset position.

•Relay outputs can be assigned to work with a certain preset.

❖Reserved Presets for Special Purpose

•Most of camera settings are directly changed by calling Reserved Presets, not entering into OSD menu. For more information,refer to “Reserved Presets”(page 15) in this manual.

6 – 36x SMART DOME CAMERA