ENGLISH

Advanced Recording

EASY Mode (for Beginners)

The EASY mode allows a beginner to make good recordings easily. The EASY mode only operates in CAMERA, M.REC mode.

1.Set the power switch to CAMERA mode.

2.By pressing the EASY button, all functions on the camera will be set to off and the recording settings will be set to the following basic modes:

Battery level, recording mode, counter, DATE/TIME, and EIS ( ) will be displayed.

The word “EASY.Q” will appear on the LCD at the same time.

However, the DATE/TIME will only be seen if it has been previously set. (see page 55)

3.Press START/STOP to start recording.

Recording will begin using the basic automatic settings.

4.Pressing the EASY button again turns the EASY mode off.

The camera will return to the settings that were set prior to activating EASY mode.

 

EASY

 

STOP

EASY

0 : 0 0 : 0 0

 

53 min

1 0 : 0 0 AM M A Y . 1 0 . 2 0 0 2

Notes

In EASY mode, certain functions are not available, such as MENU, BLC, MF/AF. - If you want to use these functions, you must first switch the EASY mode off.

The EASY mode settings are deleted when the battery pack is uninstalled from the camcorder and therefore, they must be reset when a battery pack has been replaced.

60

Page 64
Image 64
Samsung SCD86/D87 manual Easy Mode for Beginners