Samsung SCD86/D87 manual Connecting to a TV which has no Audio and Video input jacks, Playback

ENGLISH

Playback

Connecting to a TV which has no Audio and Video input jacks

✤ You can connect your camcorder to a TV through a VCR.

1.Connect the camcorder and VCR with the Audio/Video cable. ■ The yellow plug : Video

■ The white plug : Audio(L)

■ The red plug : Audio(R) - STEREO only

2. Connect a TV to the VCR.

VIDEO AUDIO(L)

VCRAUDIO(R)

S-VIDEO

S-VIDEO

3. Set the power switch on the camcorder to PLAYER mode.

4. Turn on both the TV and VCR.

■ Set the input selector on the VCR to LINE. ANTENNA

■ Select the channel reserved for your VCR on the TV set.

5.Play the tape back.

Playback

✤ You can play the recorded tape in PLAYER mode.

1.Connect a power source and set the power switch to PLAYER mode.

2.Insert the tape you wish to play back.

3.Using the (FF) and (REW) buttons, find the first position you wish to play back.

4.Press the (PLAY/STILL) button.

■ The images you recorded will appear on the TV after a few seconds.

■ If a tape reaches its end while being played back, the tape will rewind automatically.

TV

A/V

CAMCORDER

CAMERA

OFF

PLAYER

Notes

■It is best to decrease the volume of the built-in speaker when your camcorder is connected to the TV.

■The playback mode (SP/LP) is selected automatically.

71