ENGLISH
Basic Recording
33
Adjusting the LCD during PLAY
The LCD adjustment method in PLAYER mode is identical to step number 4 of page 30, except the power
switch must be set to PLAYER.
Controlling the Sound from the Speaker
✤When you use the LCD monitor while playing back,
you can hear sound from the Speaker.
✤Volume of the Speaker is controlled by the UP/DOWN
dial tab on the camcorder.
✤If you close the LCD monitor, the LCD monitor and
Speaker are turned off.
✤If the speaker does not work properly, check the following:
■ Is the LCD monitor closed?
■ Is the volume adjusted to a low level?
■ Is the speaker off? (see page 59)
Notes: ■ Lower the volume if vibration from the built-in speaker causes screen disturbance.
■ Volume display will automatically disappear 2 seconds after adjusting.
Viewing a Still Picture
■Press (PLAY/STILL) button during playback.
■To resume playback, press the (PLAY/STILL)
button again.
Picture Search
■Keep pressing (FF) or (REW) button
during playback.
■To resume normal playback, release the button.
PLAY/STILL
REW FF