Using Your Device 10
The rear of the base station provides access to the WAN port,
power port, and external GPS antenna.
1.
GPS Antenna Port
slides to provide access to the external
GPS antenna for removal and relocation.
•
A red GPS LED indicates a GPS signal could not be detected using
the internal GPS antenna. The external GPS antenna should be
connected. See “External GPS Antenna” on page13.
2.
Heat Vents
provide passive ventilation for the base station
and allow for dissipation of internally generated heat.
Note:
The base station needs to remain vertical and in a well-ventilated
location. The vertical position allows proper air flow to the internal
components.
3.
DC 12V Power Port
provides power to the base station when
connected to the AC power supply and cord (included).
Warning!:
Only use the provided power cord and supply. Using any other
power source may damage the base station.
LED Function Description
PWR Power •
Solid blue
: normal
•
No light
: abnormal
SYS System connected •
Solid blu
e: normal
•
Solid red
: abnormal
GPS GPS signal •
Solid blue
: normal
(GPS is received)
•
Blinking blue or red
:
while searching for GPS
•
No light
: abnormal (GPS
signal cannot be
received, the external
GPS antenna is
required)
WAN WAN (Ethernet) connection •
Solid blue
: normal
•
Blinking blue
: data
communication
•
No light
: abnormal
Verizon - WSE.book Page 10 Monday, November 17, 2008 4:48 PM