External GPS Antenna 14
3. Firmly press down on the Open groove (top of station).
4. Slide the protective cover back to expose the rectangular
GPS antenna.
5. Use a blunt tool (such as a coin) to carefully pry the GPS
antenna away from the base station, in the same direction
as shown in step 4.
6. Remove the GPS antenna from its compartment.
7. Connect and secure the GPS antenna to the end of the
provided GPS cable labeled "Connect to GPS Antenna."
8. Connect and secure the terminal end of the same
mini-coax cable to the port on the base station (within the
GPS antenna compartment).
Warning!:
Do not force the connector into the GPS antenna port as this can
damage the connector.
9. Replace the cover on the station. Verify the cable is
threaded through the opening on the cover.
Tip:
Place the antenna near a window where the GPS signal is strongest.
Warning!:
Do not use duct tape to secure the GPS antenna to its new
location.
Tip:
You can use double-sided tape to secure the bottom of the GPS antenna
to its new location.
GPS antenna
cover
Verizon - WSE.book Page 14 Monday, November 17, 2008 4:48 PM