Samsung SCV-2080R manual Troubleshooting, Specifications, Nothing appears on the screen

Troubleshooting

If you have trouble operating your camera, refer to the following table.

If the guidelines do not enable you to solve the problem, contact an authorized technician.

•Nothing appears on the screen.

▶Check that the power cord and line connection between the camera and monitor are fixed properly.

▶Check that you have properly connected UTP cable or BNC cable to the camera.

•The image on the screen is dim.

▶Is lens stained with dirt? Clean your lens with soft, clean cloth. ▶Set the monitor to proper condition.

▶If the camera is exposed to too strong light, change the camera position.

•The image on the screen is dark.

▶Adjust the contrast feature of the monitor.

▶If you have an intermediate device, set the 75Ω / Hi-z properly.

•The camera is not working properly, and the surface of the camera is hot.

▶Check that you have properly connected the camera to an appropriate power source.

•The SENS-UP function does not work.

▶Check that AGC of EXPOSURE SETUP menu is ‘OFF’.

▶Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.

•The Motion Detection function does not work.

▶Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.

•Color is not correct.

▶Check the setting of WHITE BAL SETUP menu .

•The screen flickers continually.

▶Check that direction of camera turns toward the Sun.

•When coaxial communication is not available:

▶Make sure that the camera and monitor are installed within the recommended distance. ▶Use the video amplifier equivalent to coaxitron if the recommended installation distance

is exceeded.

	Specifications
	SCV-2080RN	SCV-2080RP
ELECTRICAL
Input Voltage	DC 12V ± 10% / AC 24V ± 10%
Power Consumption	Max 5W (LED ON)
VIDEO
Imaging Device	1/3 inch, Diagonal 6mm Super HAD CCD
Total Pixels	811(H) x 508(V)	795(H) x 596(V)
Effective Pixels	768(H) x 494(V)	752(H) x 582(V)
Scanning System	2:1 Interlace
Synchronization	Internal /Line-Lock
Frequency	H : 15.734KHz V : 59.94Hz	H : 15.625KHz V : 50.00Hz
Horizontal Resolution	COLOR : 600TVL, B/W : 700TVL
Min. Illumination	LED ON : 0Lux / LED OFF : 0.15Lux(Color, F1.2), 0.0003Lux(Color,SENS-UP x512)
Visibility distance(IR LED)	30m(10EA)
S/N (Y Signal)	52dB (Weight On, AGC Off)
Video Output	CVBS : 1.0Vp-p, 75Ω composite
LENS
Zoom Ratio	3.6x (Manual)
Focus Length	2.8 ~ 10.0mm (F1.2)
Angular Field of View	H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)
PAN / TILT / ROTATE
Pan / Tilt / Rotate Range	0°~ 340°/ 0°~ 146°/ 0°~ 340°
OPERATIONAL
Electronic Shutter Speed	1/60 ~ 1/120k sec	1/50 ~ 1/120k sec
On Screen Display	NTSC : 7 Languages, PAL : 15 Languages
SSDR	On / Off (Level adjustable)
Backlight Compensation	BLC / HLC / OFF
Day & Night	COLOR / B/W / AUTO (ICR)
Gain Control	Low / High / Off
White Balance	ATW /Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration)	Auto /Off (Selectable x2 ~ x512)
Motion Detection	On / Off (8 Programmable zones)
Privacy Masking	On / Off (12 Programmable zones)
3D Noise Filter (SSNRIII)	On / Off (Level adjustable)
Digital Zoom	On / Off (x1 ~ x16)
Digital Image Stabilization(DIS)	On / Off
Camera Title	On / Off (Displayed 15 Characters)
Sharpness	On / Off (Level adjustable)
Flip / Mirror	On / Off
Communication	Coaxial, RS-485
Protocol	Coaxial(Pelco), RS-485(SAMSUNG-T, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH,
	HONEYWELL, SAMSUNG-E)
ENVIRONMENTAL
Operating Temperature / Humidity	-10°C ~ +50°C / 30% ~ 80% RH
MECHANICAL
Water Resistance	IP66
Dimension (Weight)	Ø148 x 126mm (1.3Kg)

※The specification for this product may change without prior notice for product improvement.

COLOR DOME CAMERA 32 User Guide COLOR DOME CAMERA 33 User Guide