Installation
Adjusting varifocal lens zoom and focus
1)Unlock the zoom (focus) handle by turning
2)Adjust the zoom (focus) by moving the handle to WIDE (NEAR) or TELE (FAR).
3)After adjustment, tighten the zoom (or the focus) handle, taking care that the adjusted position does not change.
Focus Handle |
Zoom Handle |
Connection
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the monitor.
•The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument.
•Please turn off the power when connecting.
Monitor
CCTV Camera
Connecting to Power
The recommended adaptor specification for
Please check the standard power requirement before connecting the power.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG) | #24(0.22㎟) | #22(0.33㎟) | #20(0.52㎟) | #18(0.83㎟) |
Resistance value(Ω/m) | 0.078 | 0.050 | 0.030 | 0.018 |
Voltage drop(V/m) | 0.028 | 0.018 | 0.011 | 0.006 |
• Therefore having an excessively long distance between the power adaptor and the
camera may affect the camera’s performance.
※Standard voltage for camera operation : DC 12V±10%, AC 24V±10%
※There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Notes
•Please use a power adapter that meets the required standards.
•Please connect the power after installation.
COLOR DOME CAMERA 12 User Guide | COLOR DOME CAMERA 13 User Guide |