G
ETTING
STARTED
1.7
1
3
(status map)
When an error occurs, the light on the
corresponding location on the Status map turns
on, as well as the error indicator, and the error
message appears on the display so that you can
locate the error. For details on the meaning of
the error messages, see page 8.11.
(Error
indicators)
Turns on when a paper jam occurs. To clear
the jam, see page 8.4.
Turns on when the toner or drum has
almost run out. To replace the toner or
drum cartridge, see page 7.3 and page 7.8.
Turns on when the input tray you are using
is empty. To load paper, see page 1.17.
Turns on when an error occurs on the
system.
4Displays the current status and prompts during
operation.
5
C
O
P
Y
Used to adjust the contrast of the current copy
or fax job.
Used to select the text type for the current copy
job or fax job.
Used to specify the paper tray you want to use
in Fax or Copy mode.
Used to set up special copy features, such as
AutoFit, Clone, and Collation.
The current copy job will use both sides of the
paper when printed.
6Used to dial a number or enter alphanumeric
characters.
ex) The paper is jammed in the exit area.