P
APER
H
ANDLING

3.3

3
Paper Guidelines
When selecting or loading paper, envelopes, or other special
media, keep these guidelines in mind:
•Attempting to print on damp, curled, wrinkled, or torn paper
can cause paper jams and poor print quality.
• Use only high quality copier grade paper. Avoid paper with
embossed lettering, perforations, or texture that is too
smooth or too rough.
• Store paper in its ream wrapper until ready to use. Place
cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture, or other conditions
that can cause it to wrinkle or curl.
•During storage, moisture-proof wrap (any plastic container or
bag) should be used to prevent dust and moisture from
contaminating your paper.
• Always use paper and other media that conform with the
specifications listed under “General Specifications” on
page B.2.
•Use only well-constructed envelopes with sharp, well creased
folds.
- DO NOT use envelopes with clasps and snaps.
- DO NOT use envelopes with windows, coated lining,
self-adhesive seals, or other synthetic materials.
- DO NOT use damaged or poorly made envelopes.
• It is recommended that you feed special paper types one
sheet at a time.
• Only use the special media recommended for use in laser
printers.
•To prevent special media such as transparencies and label
sheets from sticking together, remove them from the exit tray
as they are printed.
• Place transparencies on a flat surface after removing them
from the machine.
• Do not leave the film in the paper tray for long periods of
time. Dust and dirt may accumulate on them resulting in
spotty printing.
•To avoid smudging caused by fingerprints, handle
transparencies and coated paper carefully.
•To avoid fading, do not expose the printed transparencies to
prolonged sunlight.