C
OPYING

4.11

4
Duplex Copying
Duplex copying allows you to print on both sides of the paper.
Before printing in the duplex mode, decide on which edge you
will bind your finished document. The binding options are:
LONG EDGE, which is the conventional layout used in book
binding.
SHORT EDGE, which is the type often used with calendars.
1
Load the documents to be copied in the ADF.
Make sure that the original document is single sided.
Or, place a sheet of the documents on the document glass
face down.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
Press Duplex Copy. The current setting appears on the
bottom line of the display.
4
Press Duplex Copy or use the navigation buttons to select
the binding orientation. If you select “OFF”, you cannot use
duplex copying.
5
Press Mode/Enter (Enter on SCX-5115) to save the
selection.
6
If necessary, customise the copy settings including the
number of copies, copy size, contrast and image type using
the control panel buttons. See “Setting Copy Options” on
page 4.6.
NOTE:
In duplex copy mode, the PHOTO setting using the Image
button is disabled.
7
Press Copy/Start to begin copying.
Long Edge
Short Edge