installing your dryer
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1.Over the edge of a wash basin: The drain hose must be placed lower than 90cm. If the end of the drain hose needs to be placed above the ground, we recommend a height of 60cm ~ 90cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
Drain hose 
Hose guide 
Cable Tie
90 cm
2.Assemble the drain hose and the hose guide and fix them with the
3.You can drain the condensed water by connecting the accessory hose (long drain hose) to the
Connecting the direct-hose
You can immediately drain the condensed water that comes out while drying, by connecting the drain hose to the tap.
1.Assemble the hose connector and the hose.
Since there is a danger of water leaking from the hose
CAUTION connecter and accessory hose, make sure that they are connected firmly.
Hose Connecter
2.Connect the end of the hose to the tap.
14_ installing your dryer
