![](/images/new-backgrounds/1254576/25457631x1.webp)
installing your dryer
DOOR REVERSAL
Depending on your requirements (installation location, space constraints), you can change the direction the door opens.
| This is done according to the customer’s needs. The qualified technician or customer can do this | ||
WARNING themselves directly. |
| ||
1. | Unplug the power cord. | ||
2. | Remove the two screws from the | ||
| |||
3. | Lift the door to separate it. |
|
4. Remove the 16 screws.
5. | After removing the screw, rotate the | |
|
| |
| • Since the | |
|
| |
CAUTION | completely fixed, rotate them holding the lower part so that they are |
|
| not separated. |
|
| • Work carefully so that the |
|
|
| |
|
|
6.After rotating them by 180˚, hold them in the position as shown by the
figure.
7.Assemble the
disassembly, assemble it by rotating it by 180˚.)
English - 16