5. Router & Port Forwarding SET Up
17The following is configuration for the Internet connection. This is a typical example.
Cable/ADSL Modem | Broadband |
Router or HUB |
Internet
DDNS Server | or | ||
(websamsung.net) |
| Direct LAN |
|
|
| (Fixed/Static IP) |
|
|
|
|
|
|
|
|
|
DVR
Local PC
18In the Network Properties window, check the IP address and gateway.
192.168.1.200
255.255.255.0
192.168.1.1
19Connect to the router using the gateway address found in step ‘ 18 ’ above.
Port Forwarding
When the router setting is done, select Virtual Server in the “Advanced” tab where you can configure the Port Forwarding settings. Click “Apply” to apply your settings.
`` For more information, refer to the router guide of the manual CD. (Model:
IP : 192.168.1.200 |
| IP : 192.168.1.200 |
Protocol : TCP |
| Protocol : TCP |
Private Port : 4520~4524 |
| Private Port : 80 |
Public Port : 4520~4524 |
| Public Port : 80 |
Running the Quick Connect program
`` For more information, refer to the quick connect guide of the provided manual CD.
It is easy for you to use DHCP setting for Quick Connection Program. Path: Network Connection Mode Connection
Change: Static IP Dynamic IP
1.Insert the provided CD into your computer’s CD drive, and double click “Quick Connect.exe” program to run it.
2.Click [Next >] button.
3.When < > appears on the right side of TCP Port and Web port number, click [Next >] button.
4. Click [Finish] button to exit the program.
20If you first connect to the router, you will see the “Setup Wizard” run that proceeds in the following order.
