Samsung SEK-1000 manual Smart Touch Control, Inserting the Batteries AAA X, Connecting to the TV

Smart Touch Control

The Smart Touch Control makes it easier and more convenient to use the TV. For example, you can use the remote panel's built-in touch pad to move the focus and make selections as you would on a computer using a mouse. In addition, you can use the virtual remote panel displayed on the screen to change channels, play media files, and access favorites.

Inserting the Batteries (AAA X 2)

111Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover’s notch with a fingernail to remove the cover completely.

"" Check the location of the battery cover groove. The groove's location may vary depending on the type of Smart Touch Control is provided with the product.

222

333

Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

Align the battery cover with the back of the remote control and press down along the edges until it is cleanly attached to the remote control.

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV.

"" We recommend to use the Smart Touch Control in less than 20ft(6m). A usable distance may differ depending on the wireless environmental conditions.

111To turn on the TV, point the Smart Touch Control at the remote panel receiver of the TV and press the TV button. The remote panel receiver's location may vary depending on the model.

222A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.

<Attempting to connect and completion icons>