USING THE WATER DISPENSER (OPTIONAL)
You can easily obtain chilled water with the water dispenser without opening the refrigerator door. In addition, you can save electricity by reducing the number of times the door is opened by more than 30%.
Overview
Press lever
Locking device
Water tank cap
Water tank
Water supply device
WHEN THE WATER DISPENSER IS NOT IN USE, THE FOLLOWING IS RECOMMENDED
Fix the water supply device tightly into the fixing hole.
• The door will not close automatically when the water supply device is pulled out for a long time due to the leakage of cold air.
Place a spare beverage bottle by the exclusive water tank.
• Two 1.5 litre bottles can be used.
Set the locking device to the “LOCK”.
•When pressing the “PUSH” button with the water supply device only fixed at the fixing hole, and the locking device is set on “OPEN”, the water supply device can be removed from the fixing hole and cold leaks.
When exposing to child, set the locking device to the “LOCK”.
Note
FILLING THE WATER TANK
Open the water tank by removing the round cap and fill it with drinking water. (Do not use hot water.)
• Fill the tank up to the full level (just below 4.2 litres).
Replace the round cap by pushing down on it until it clicks into place.
Place a cup on the cup support, then press the “PRESS” lever.
11
