How to Use the Camera
WDR : When there are both bright and dark areas at the same time, this mode makes both areas distinctive.
OFF : Deactivates the WDR function.
WDR | OFF |
BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
3. Select a desired mode using the Left and Right buttons and press the SET button.
• Select WDR to adjust the WDR LIMIT. Select LOW, MIDDLE, or HIGH.
• Select ‘BLC’ to adjust the area to be enhanced by the WDR function.
Notes
•You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’ menu is selected.
•Since the following symptoms may occur according to the ambient illumination when WDR is selected, set it to OFF.
Color or screen changes unnaturally.
Noise appears in the bright part of the screen.
•Since the performance of the WDR function may be affected by the area of the bright part of the screen, optimize the installation angle for the best WDR performance.
•If you increase LIMIT, the screen display may be distorted.
•For high performance of WDR function, using DC Iris lens rather than manual lens is recommended.
SSNR
This function reduces the background noise in a low luminance environment.
1.When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and Down buttons so that the arrow indicates ’SSNR’ .
MAIN | SETUP |
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
2.Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
COLOR CCD CAMERA 30 User’s Manual | COLOR CCD CAMERA 31 User’s Manual |